Induction Cooking; Cookware - Maytag MIT8795B Use & Care Manual

Smoothtop double oven inducition range
Hide thumbs Also See for MIT8795B:
Table of Contents

Advertisement

Available languages

Available languages

To find out whether your pans can be used with an induction
cooktop, flip the pan over, hold a magnet to the bottom of the
pan, and see whether it sticks. If the magnet sticks to the bottom
of the pan, the pan is ferromagnetic
and can be used for
induction cooking.
The number on the surface cooking area heat setting display will
flash if no pan is placed on the surface cooking area, or the pan is
not made of the right material, or it is not the right size. It will stop
flashing once a suitable pan is placed on the surface cooking
area. If you take longer than 90 seconds to place the correct pan
on the surface cooking area, the surface cooking area will turn
off.
Ideal cookware should have a flat bottom, straight sides and a
well-fitting
lid, and the material should be of medium-to-heavy
thickness.
Choose the correct pan size for each surface cooking area. The
diameter of the pan's base should correspond to the size of the
surface cooking area.
Home
Causes sg
Canning can be performed on the induction cooktop.
See the
"Cookware"
section to check if the canner will work on the
induction cooktop. When canning for long periods, alternate the
use of surface cooking areas or elements between batches. This
allows time for the most recently used areas to cool.
Center the canner on the largest surface cooking area or
element. On electric cooktops,
canners should not extend
more than 1/2"(1.3 cm) beyond the surface cooking area or
element.
Do not place canner on 2 surface cooking areas or elements
at the same time.
On ceramic glass models, use only flat-bottomed
canners to
avoid damage to the cooktop and elements.
For more information, contact your local agricultural
extension office, or refer to published home canning guides.
Companies that manufacture
home canning products can
also offer assistance.
NOTE: Cookware manufacturers
often give the diameter across
the top of the pan. This is usually larger than the diameter of the
base.
Pans with rough finishes may scratch the cooktop.

Advertisement

Table of Contents
loading

Table of Contents