Maytag MIT8795B Use & Care Manual page 20

Smoothtop double oven inducition range
Hide thumbs Also See for MIT8795B:
Table of Contents

Advertisement

Available languages

Available languages

"Press (+) for Upper Oven" will appear in the upper oven text
area, and "Press (-) for Lower Oven" will appear in the lower
oven text area
3. Press the Temp/Time "+" or "-" pads to select the desired
oven.
"Remove Racks" will scroll in the selected oven text area
followed by "Select option." In the other text area, "Press + or
- key" will scroll from left to right.
4. Choose the Standard Clean setting by pressing the Temp/
Time "+" or "-" pads until "Standard CLEAN" and "Push
START" scroll in the displays.
5. Press START.
"Select level" will appear in the display.
6. Press the Temp/Time "+" or "-" pads to adjust the clean level.
Use the following chart to select the desired cleaning time.
Level
Duration
Level 1 (Quick)
2Hr
Level 2
2Hr 30 m
Level 3
3Hr
Level 4 (Reg)
3Hr 30 m
Level 5
4Hr
Level 6 (Maxi)
4Hr 30 m
7. Press START.
"Unlock in XXX" will scroll in the upper or lower text area
(depending on oven selection). "Locking" will scroll until the
door is locked.
After the door is lock, "CLEAN-UPPER"
or "CLEAN-LOWER"
will scroll in the selected oven text area until the clean cycle is
finished.
When the self-clean cycle ends:
"CIn complete" will scroll in the selected oven text area. "Oven
cooling" will scroll in the display until the oven temperature
falls
below 500°F (260°C).
"Unlocking"
will be displayed until the oven door unlocks and the
lock icon turns off.
To
1.
Delay Start Self-Clean:
Press DELAY START.
"Press (+) for Upper Oven" will appear in the upper text area,
and "Press (-) for Lower Oven" will appear in the lower text
area.
2. Press the Temp/Time "+" or "-" pads to select the desired
oven.
"--:--" will be displayed, and "Set starting time. Push START"
will scroll from right to left in the selected oven text area for
2 minutes or until the Temp/Time "+" or "-" pads are pressed
again.
3. Press the Temp/Time "+" or "-" pads until the desired time is
reached.
"Select cooking/cleaning
mode" will scroll in the selected
oven text area for 2 minutes or until a cleaning cycle is
selected.
4=
Press SELF CLEAN.
"Press (+) for Upper Oven" will appear in the upper oven text
area, and "Press (-) for Lower Oven" will appear in the lower
oven text area
5. Press the Temp/Time "+" or "-" pads to select the desired
oven.
"Remove Racks" will scroll in the selected oven text area
followed by "Select option." In the other text area, "Press + or
- key" will scroll from left to right.
6. Choose the Standard Clean setting by pressing the Temp/
Time "+" or "-" pads until "Standard CLEAN" and "Push
START" scroll in the displays.
7. Press START.
"Select level" will appear in the display.
8. Press the Temp/Time "+" or "-" pads to adjust the clean level.
Use the following chart to select the desired cleaning time.
Level
Duration
Level 1 (Quick)
2Hr
Level 2
2Hr 30 m
Level 3
3Hr
Level 4 (Reg)
3Hr 30 m
Level 5
4Hr
Level 6 (Maxi)
4Hr 30 m
9. Press START. The cleaning cycle will begin when the delay
time is reached.
The cleaning cycle will begin when the delay time is reached.
"Unlock in XXX" will scroll in the upper or lower text area
(depending on oven selection). "Locking" will scroll until the
door is locked.
After the door is lock, "CLEAN-UPPER"
or "CLEAN-LOWER"
will scroll in the displays until the clean cycle is finished.
When the self-clean
cycle ends:
"CIn complete" will scroll in the selected oven text area. "Oven
cooling" will scroll in the display until the oven temperature falls
below 500°F (260°C).
"Unlocking"
will be displayed until the oven door unlocks and the
lock icon turns off.
2O

Advertisement

Table of Contents
loading

Table of Contents