Cooktop Use; Induction Cooking; Cooktop Controls - Maytag MIT8795BS Use And Care Manual

Smoothtop double oven induction range
Table of Contents

Advertisement

Available languages

Available languages

This induction cooktop generates and uses ISM frequency energy that heats cookware by using an electromagnetic field. It has been
tested and complies with Part 18 of the FCC Rules for ISM equipment. This induction cooktop meets the FCC requirements to minimize
interference with other devices in residential installation.
This induction cooktop may cause interference with television or radio reception. If interference occurs, the user should try to correct
the interference by:
Relocating the receiving antenna of the radio or television.
Increasing the distance between the cooktop and the receiver.
Connecting the receiver into a different outlet.
It is the user's responsibility to correct any interference.
NOTE: People with a pacemaker or similar medical device should use care when standing near this induction cooktop while it is on. The
electromagnetic field may affect the pacemaker or similar device. Consult your doctor, or the manufacturer of the pacemaker or similar
medical device for additional information about its effects with electromagnetic fields of the induction cooktop.
IMPORTANT: Pan size, material and positioning are very important to achieve the best results when using an induction cooktop. See
"Induction Cooking" in the "Cooktop Use" section and the "Cookware" section before using the cooktop.
This manual covers different models. The range you have purchased may have some or all of the items listed. The locations and
appearances of the items shown here may not match those of your model.
A
B
A. Cooktop power
D. Left front surface cooking area display
B. Simmer
E. Left rear surface cooking area display
C. Melt and hold
F. Surface cooking area off

Induction Cooking

Induction cooking is quite different from traditional forms of
cooking. The heat is generated directly in the pan, keeping the
cooking surface cooler than with a traditional element.
Induction cooking does not lose as much heat as traditional
forms because all the heat is created in the pan itself.
The cooktop heats up or cools down quickly after the controls
are set. It also stops heating when the pan is removed without
turning off the power.
Food spilled on the cooktop surface will not burn because the
glass is not heated. Induction cooking allows for immediate
cleaning after use because the heat is created in the pan.
Pan size, material (see "Cookware" section), and positioning are
very important to achieve maximum wattage.
The diameter of the pan's base should be equal to the size of the
element.
If the pan is too small, the burner does not sense the pan and will
not activate.

COOKTOP USE

F
E
D
C
M
G
H
L
G. Heat level display
H. Timer display
I. Right rear surface cooking area display
J. Right front surface cooking area display

Cooktop Controls

Turn off all controls when done cooking.
Failure to do so can result in death or fire.
The touch-activated electronic controls offer a variety of heat
settings for optimal cooking results. When melting foods such as
chocolate or butter, the surface cooking area can be set to the
Melt and Hold function for minimal surface cooking area
operation.
I
J
K
K. Control lock
L. Heat level power slider
M. Timer (increase/decrease)
WARNING
Fire Hazard
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

W10600814bMit8795b

Table of Contents