Download Print this page

Feiss OL13601 Installation Instructions

Chappman outdoor wall

Advertisement

Available languages

Available languages

Quick Links

Installation Instructions for
Chappman Outdoor Wall
Outdoor
G
ENERAL RODUCT NFORMATION
P
These fixtures are intended to be installed utilizing
boxes.
This product is safety listed for wet locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED
lamps may be dimmed with a
additional information.
This instruction shows a typical installation.
1A
ANCHOR
ANCHOR
JUNCTION BOX
SCREW
7
8
3
MOUNTING
PLATE
13
For Model OL13603 Only: Temporarily install the mounting plate to the junction box.
1
For Model OL13603 Only: Mark the anchor hole locations on the mounting plate and remove the mounting plate.
2
For Model OL13603 Only: Drill appropriate size holes at the marked locations and install the anchors.
3
Secure the mounting plate to the junction box.
4
For Model OL13603 Only: Screw the anchor screws into the anchors.
5
Connect the fixture to a suitable ground in accordance with local electrical codes.
6
Connect the white fixture wire to the neutral power line wire with a wire nut.
7
Connect the black fixture wire to the hot power line wire with a wire nut.
8
Mount the fixture base onto the mounting plate and secure it with the fixture screws.
9
Insert the glass panels into the shade and secure them in place using the panel brackets and screws.
10
Install the shade onto peg on the fixture and install the washer and thumb screw. Fully secure the shade to the fixture
11
using the shade screws.
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
12
For wet locations, caulk around the base of the fixture with waterproof construction sealant.
13
I
:
NEC
compliant junction
LED
dimmer. Consult lamp manufacturer for
FIXTURE
BASE
5
9
FIXTURE
SCREW
O 13600, OL13601, O 13602, O 13603
L
CAUTION RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
10
11
11
11
1
OL13600-OL13601-OL13602-OL13603
L
L
-
FIXTURE
SOCKET
LAMP
PANEL SCREW
AND BRACKET
GLASS PANEL
SHADE
SHADE SCREW
WASHER AND
THUMB SCREW
1.0

Advertisement

loading
Need help?

Need help?

Do you have a question about the OL13601 and is the answer not in the manual?

Questions and answers

Summary of Contents for Feiss OL13601

  • Page 1 Installation Instructions for OL13600-OL13601-OL13602-OL13603 Chappman Outdoor Wall O 13600, OL13601, O 13602, O 13603 Outdoor ENERAL RODUCT NFORMATION These fixtures are intended to be installed utilizing compliant junction boxes. CAUTION RISK OF FIRE This product is safety listed for wet locations.
  • Page 2 ATTENTION RISQUE INCENDIE Ce produit doit être installé conformément au code d'installation en vigueur par une personne familière avec la construction et l'exploitation du produit et les risques qu'il entraîne. Utiliser les conducteurs d'alimentation supérieure à 90° c. BASE DE LUMINAIRE LUMINAIRE ANCRE...
  • Page 3 PRECAUCIÓN RIESGO DE INCENDIO Este producto debe instalarse de acuerdo con el código de instalación aplicable por una persona familiarizada con la construcción y operación del producto y los riesgos que conllevan. Utilizar conductores de suministro mínimo 90° c. BASE DE LUMINAIRE LA LÁMPARA ANCLAJE...
  • Page 4 SAVE THESE INSTRUCTIONS! 7400 Linder Ave, Skokie, 160077 800.969.3347 www.Feiss.com © 2017 Feiss.All rights reserved.The "Feiss" graphic is a registered trademark of Feiss. Feiss reserves the right to change specifications for product improvements without notification. A Generation Brands Company...

This manual is also suitable for:

O13600O13602O13603