Setting Configuration Parameters; Changing Configuration Parameters - Keysight 82357B User Manual

2 Using the Keysight 82357B

Setting Configuration Parameters

This section gives guidelines to change or set various configuration parameters
for the 82357B, including:

– Changing Configuration Parameters

– Changing Modes of Operation
– Setting Timeout Floor Value
– Setting High-Performance Operation
Changing configuration parameters
To change the VISA or SICL Interface ID, the LU or GPIB Address, or if you want to
check the values of these configuration parameters, highlight the USB/GPIB
interface in the explorer view (tree view) of the Connection Expert window. Click
on the Change Properties... button in the property pane to display the Keysight
82357 Interface dialog box. Choose the settings you want, then click OK. Clicking
Cancel will cause the configuration set in the preceding dialog box to be used.
Although you can change the Logical Unit (LU) Number and GPIB Address
NOTE
values for an 82357B, this is generally not necessary and may cause running
applications to fail or stop running.
36 Keysight 82357B User's Guide