Check Device Manager - Keysight 82357B User Manual

Troubleshooting the Keysight 82357B 3

Check Device Manager

You can use the Windows Device Manager to reinstall the 82357B, as required.
Go to Device Manager by selecting Start > Control Panel > System > Hard ware >
Device Manager.
For Windows 8, right-click the bottom-left corner of the Desktop and select
Device Manager.
From the Device Manager, select 82357 and then Properties. Tab to Driver and
click Reinstall Driver. This will allow the Windows Plug-and-Play Manager to
begin searching for a driver for the 82357B. Since the Device Manager may have
disabled the 82357B USB device, click Enable to restart the 82357B.
If you are using a USB scanner, scanner conflicts are possible. See Check USB
NOTE
scanner in the "Software Installation Checks" on page 46.
Keysight 82357B User's Guide 45