Page 5
Safety Symbols Caution, risk of danger (refer to this manual for specific Warning or Caution information) Regulatory Markings The CE mark is a registered trademark of the European Commu- nity. This CE mark shows that the product complies with all the relevant European Legal Directives.
Page 6
Technologies assumes no liability for the customer’s fail- ure to comply with these requirements. This product is designed for use in compliance with: • IEC 61010-1:2001/EN 61010-1:2001 • USA: UL61010-1:2004 • Canada: CSA C22.2 No. 61010-1:2004 For further information on safety, refer to the 82357B User’s Guide.
Insert the Automation-Ready CD 3 Install the IO Libraries Suite 3 Look for IO icon 4 3 Connecting the 82357B Plug the 82357B into a USB Port 5 Observe the 82357B LEDs 5 4 Configuring the 82357B Observe the Keysight Connection Expert 6...
Page 8
82357B USB/GPIB Interface THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK. 82357B Quick Start Guide...
Page 9
This quick start guide shows a suggested six-step process to install the 82357B and the Keysight IO Libraries Suite, to connect the 82357B to your PC, to configure the 82357B, and to program GPIB instruments via the 82357B. It also includes the product technical specifications information.
• Windows 7 (32-bit and 64-bit) — Home Premium, Business, and Ultimate • Windows 8 • If you have the Keysight IO Libraries v14.2 installed and NO TE would like to use 82357B USB/GPIB Interface, you will need to install the 82357B driver. You can download the...
Run then type <drive>:autorun\auto.exe, where <drive> is your CD drive letter. Install the IO Libraries Suite • See the 82357B User’s Guide for the full IO Libraries Suite NO TE installation procedures. • You are recommended to install the latest version of IO Libraries Suite.
• Disconnect any USB instruments from your PC. • Disconnect any Keysight 82357B USB/GPIB Interface converters from your PC. • Disconnect any Keysight E8491 IEEE 1394 PC Link to VXI interfaces from your PC. Look for IO icon After the libraries are installed, an IO icon is displayed on the Windows taskbar notification area.
3 Connecting the 82357B Plug the 82357B into a USB Port Plug the 82357B USB cable into an available USB port on your PC or on a supported USB hub. To connect to USB hubs, see the 82357B User's Guide. The picture shown below is for illustration purposes only.
Instrument I/O on this PC pane (also called the “Explorer Pane”). At this time, the Connection Expert window should refresh. If it does not refresh automatically, click Refresh All. The 82357B will appear in the Connection Expert explorer as a USB/GPIB interface as shown below.
5 Connecting GPIB Instruments 5 Connecting GPIB Instruments Connect the 82357B to GPIB instruments Connect one or more GPIB instruments (up to 14 instruments maximum) to the GPIB connector on the 82357B as shown below: • Single instrument connection 82357 B...
6 Programming via the 82357B Use the Keysight Interactive IO to communicate with the GPIB instruments After the 82357B has been configured and connected to the GPIB instruments, you can use the Interactive IO to establish communication between your PC and the connected GPIB instruments.
Other References Related documentation See the following documents for information related to the 82357B. All documents are available in electronic format by clicking on the IO icon on the Windows taskbar notification area then selecting Documentation. • Keysight 82357B USB/GPIB Interface User's Guide describes the 82357B, and provides installation and trouble- shooting information.
Page 18
82357B USB/GPIB Interface Other References THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK. 82357B Quick Start Guide...
Page 19
(tel) (65) 6375 8100 (fax) (65) 6755 0042 Or visit Keysight World Wide Web at: www.keysight.com/find/assist Product specifications and descriptions in this document are subject to change without notice. Always refer to the Keysight Web site for the latest revision.
Page 25
安全記号 注意、 危険あり (具体的な警告/注意情報については本書を参照) 規制マーク CE マークは、欧州共同体の登録商標です。この CE マークは、製品 が関連するすべての欧州法的指令に適合することを示します。 ICES/NMB-001 は、この ISM デバイスがカナダの ICES-001 に適合し ていることを示します。 Cet appareil ISM est confomre a la norme NMB-001 du Canada. CSA マークは、カナダ規格協会の登録商標です。 C-Tick マークは、オーストラリアのスペクトラム管理局の登録商 標です。 これは、 オーストラリアの Radio Communication Act ( 1992 ) の条項に基づく...
Need help?
Do you have a question about the 82357B and is the answer not in the manual?
Questions and answers