Keysight 82357B User Manual page 38

Figure 3-2
2 Install Keysight IO Libraries (as required). If Version 15.0 or greater of the
Keysight 82357B User's Guide
IO icon on the Windows taskbar notification area
a If the IO icon is displayed, click the icon and select About Keysight IO Control
to display the version. The version must be 15.0 or greater.
b If the IO icon is not displayed, a version of the IO Libraries Suite may still be
installed. To verify this, check for Keysight Connection Expert in the Start
menu, or the Start Screen (Windows 8).
c If found, launch the Keysight Connection Expert and select View > Keysight
IO Control to place a check mark next to the Keysight IO Control selection.
d If Keysight Connection Expert is not found in the Start menu or the Start
Screen (Windows 8), no version of Keysight IO Libraries is installed. In this
case, or if the installed version is not 15.0 or greater, you must install the
newer version (see Step 2).
Keysight IO Libraries Suite is not installed on your PC, perform this step.
a Remove the 82357B USB cable from the USB port.
b Insert the Automation-Ready CD into your CD-ROM drive and follow the
instructions in Chapter 1, "Installing the Keysight 82357B"
libraries. If you do not have the Automation-Ready CD, you can download
the Keysight IO Libraries Suite from
c Re-attach the 82357B USB cable to the USB port and observe the LEDs for
at least 10 seconds.
If all three LEDs remain ON, go to
Troubleshooting the Keysight 82357B
www.keysight.com/find/iolib
Software Configuration
3
to install the
Checks.
47