Single 82357B Operation - Keysight 82357B User Manual

2 Using the Keysight 82357B

Single 82357B operation

When an 82357B is first installed, a default VISA Interface ID, SICL Interface ID,
Logical Unit (LU) number and GPIB Address are automatically assigned to the
serial number associated with this specific 82357B.
For example, assume an 82357B with serial number MY12345678. When this
82357B is first installed, typical values as shown are automatically assigned to
this serial number:
– VISA Interface ID: GPIB0
– SICL Interface ID: gpib0
– Logical Unit: 7
– GPIB Address: 21
You can change the parameter values of the 82357B as required. See
NOTE
configuration parameters"
The first time an 82357B is attached to a system (assuming the Keysight IO
Libraries Suite and 82357B driver are installed), the software recognizes that an
82357B is attached. If the Connection Expert is not running, the software displays
a Keysight 82357B USB/GPIB Interface Detected dialog box that allows you to
accept the current settings. If the Connection Expert is running, it automatically
refreshes, displaying the 82357B as a USB/GPIB interface in its tree view. You can
then change the properties of the interface via the Connection Expert.
The VISA and SICL Interface IDs, Logical Unit Number, and GPIB Address may be
viewed at any time in the property pane of the Connection Expert. (To view this
window, click the IO icon, then select Keysight Connection Expert.)
If you disconnect this 82357B and plug in another 82357B (with a different serial
number), or if you re-plug the same 82357B, the new 82357B will assume the
same VISA Interface ID, SICL Interface ID, LU number, and GPIB Address as the
previous 82357B.
34
on page 36 for details.
"Changing
Keysight 82357B User's Guide