Reclining Child Restraint; Removing Harness System - Safety 1st Summit Deluxe Instruction Manual

C-6 Reclining Child Restraint
This child restraint has 3
positions: Upright, Semi-
reclined, and fully reclined.
Forward-Facing - Reclined,
semi-reclined or upright.
Belt-Positioning Booster -
Must be fully-upright.
NOTE:
the recline position is to be
used only to install the child
restraint flush against the
back of vehicle seat back.
To Recline
Pull out on handle and
push to the top of the child
restraint back.
For upright position, pull out
on handle and position the
child restraint upright.
19
C-7 Removing Harness System
Harness system
child restraint as a Belt-Positioning Booster.
When forward-facing,
4
MUST be removed to use this
1. Remove Harness
Straps from Splitter
Plate
Fully loosen harness
straps. Locate splitter
plate on the back of the
seat and unfasten the
harness straps.
Store Splitter Plate
2.
Raise headrest all the way
up. Store splitter plate
by pushing it through one
opening and out the other.
3. Remove Harness
1
Straps
Pull harness through the
slots from the front (1).
2
Unthread harness from the
chest clip (2).
3
Unthread harness from the
buckle tongues (3).
Pull harness out of shell
(4).
continued on next page.
20