Reclining Child Restraint; Removing Harness System - Safety 1st Guide 65 Instructions Manual

C-6 Reclining Child Restraint
This child restraint has 2
2
positions:
1
Rear-facing -
recline the child restraint so the
lower level to ground line is level
with the ground, OR for older
children, rotate the child restraint
between the top and bottom level
to ground lines on the side of the
shell.
Forward-Facing -
upright.
Upright
For upright position, pull recline
stand out from under seat and
push up to lock in place.
To Recline
To recline, pull down to unlock
recline stand and fold under seat.
23
C-7 Removing Harness System
Only remove the harness system to clean the seat pad.
1 You MUST
2 MUST be
1.
Unhook Harness Straps
from Splitter Plate
Fully loosen harness straps.
Starting in the back of the
child restraint, unhook
harness strap loops from
splitter plate.
2.
Remove Harness Straps
1
From the front, pull harness
straps through the upper
harness slots (1).
2
Unthread harness straps from
the chest clip (2).
3
Unthread harness straps from
the buckle tongues (3).
Holding one harness strap,
4
pull harness completely out of
lower harness guides (4).
You do not need to fully
NOTE:
remove the harness straps
from the shell to clean the
seat pad.
3.
Locate Buckle Strap's
Metal Retainer
Turn the child restraint over
and locate buckle strap's
metal retainer.
continued on next page.
24