Safety 1st Summit Deluxe Instruction Manual page 7

5. Place Child in Child
Restraint
Place the child's bottom
and back flat against
the restraint. This will
increase comfort and allow
the harness straps to be
properly tightened.
6. Check Buckle
Position
Determine which of the
available buckle positions
will be comfortable and
provide a snug fit for
your child.
a. To Change Buckle
Position
Fully recline the child
restraint. Reach under the
seat between base and shell
and locate buckle's metal
retainer under the shell.
Rotate metal retainer, then
insert retainer up through
the shell and pad.
b. From the top, pull buckle
free from shell and pad.
11
c. Reposition buckle location.
Insert the buckle's metal
retainer through the
desired slot. Make sure
buckle is facing forward.
d. Reach under seat between
base and shell. Pull
buckle's metal retainer
completely through pad
and shell.
e. Pull up on buckle to make
sure it is secured. The
buckle must not pull out.
Failure to place buckle's metal retainer
completely through pad and shell can result
in serious injury or death.
12 continued on next page.