Understanding Your Vehicle; Safety Tip - Safety 1st Summit Deluxe Instruction Manual

1. Replace the Seat Pad
Replace seat pad by
reversing order:
Put pad on headrest and
replace harness guides.
Make sure harness
guides tabs go over
metal bar.
Starting from bottom of child
restraint, snap pad on shell;
tuck in pad around harness
adjuster; pull pad up and
over headrest. Attach the
elastic straps. Make sure
pad is under headrest and
replace lower harness
guides. Rethread harness
(see section C-8).
Do not use child restraint without the seat pad.
Failure to do this can result in serious injury or
death.
27
D-1 Understanding Your Vehicle
Your vehicle's features may be considerably different than
those pictured here. Consult your vehicle owner's manual to
help identify your vehicle's specific features and locations.
Seat Bight
Anchor Brackets
For Top Anchorage
Strap (Tether)
(Forward-Facing Only)
LATCH Anchors
Located in the seat
bight.

Safety Tip:

To help protect your vehicle seat's upholstery from
damage, use a single layered towel underneath and
behind child restraint.
To avoid your child being seriously burned,
take the following precautions:
1. Park in the shade or where sun does not directly
hit the child restraint.
2. Cover the child restraint with a sheet or blanket
when not in use.
3. Check for hot seat and buckles before placing
child in child restraint.
28
Air Bags
Consult your vehicle
owner's manual for
all air bag locations.
Vehicle Seat Belts
Consult your vehicle
owner's manual for
vehicle belt use.
continued on next page.