Advertisement
QuantumII
MT RFID Installation Instructions
TM
Testing Lock Functionality
Pass a Construction key over the QuantumII MT RFID reader. The green light will flash for five seconds. Be sure that the
green light flashes for five seconds while the exterior lever remains operable. If the green lights do not flash, refer to
the table below.
Lock Communication
Red and green LEDs flash
nine times simultaneously
Yellow LED flashes 12 times
Yellow LED flashes two times
Red and green LEDs flash
alternately nine times
Yellow and red LEDs flash
two times simultaneously
© SAFLOK, all rights reserved.
Electronic Function Description
Time and date not set, use the Quantum MT RFID LPI probe to reset
Dead bolt is thrown or switch cam is not properly aligned
Keycard not allowed OR keycard cancelled by new keycard
Low battery (contact the SAFLOK service department)
Bad keycard read or corrupted data (may require new
keycard)
Pg 7 of 8
INS_QTMIIMTRFID_2_12
Advertisement
