Options; Timer - Miele HG07-W Operating Instructions Manual

Timer 
The timer  gives you several options
for starting a programme at a later time.
You can set the start time or the finish
time of a programme. You can also use
the or
EcoStart SmartStart
benefit from cheaper energy tariffs at
night.
During manual detergent dispensing
the detergent will clump together if
the detergent compartment is not
dry, and this may mean it is not fully
rinsed out.
When using the timer function, make
sure that the detergent compartment
is dry before adding detergent. Wipe
dry with a cloth first, if necessary.
Do not use any liquid detergents.
These can leak out.

Danger to health due to
detergent.
To prevent children coming into
contact with dishwasher detergent:
Do not fill the detergent dispenser
until just before starting the
programme, i.e. before you activate
the timer.
functions to
Activating the timer
 Open the door.
 Switch the dishwasher on using the
 sensor control.
 Select the programme you want.
 Touch the  sensor control.
The  sensor control lights up.
You can use the  sensor controls to
choose between the
functions, or
EcoStart
applicable.
 Confirm selection of the function you
want with OK.
The last time set for the timer will be
displayed and the hour number block
will be highlighted.
 Enter the time you want for the timer
using the  sensor controls and
confirm with OK.
If, while you are setting the time, you do
not apply any settings for several
seconds, the display will revert to the
previous menu. You will then have to
enter your settings again.
After you have activated the timer, all
the displays will switch off after a few
minutes to save energy.
To switch the display back on for a
few minutes, press the  sensor
control.
You can also activate a timer via the
Miele@mobile app.

Options

Start at , Finish at or
if
SmartStart
57