Autoopen - Miele HG07-W Operating Instructions Manual

Settings

AutoOpen

In some programmes the door
automatically opens slightly to assist
the drying process.
This function can be deactivated if you
wish.

Risk of damage due to steam.
Steam from the dishwasher could
damage the edges of delicate
worktops when you open the door at
the end of the programme if the fan
is no longer running.
If you have deactivated the
automatic door opening function but
would still like to open the door at
the end of the programme, then
make sure that you open the door
fully.
Extra clean
You can choose this function to
increase the cleaning performance of
the programmes.
If you activate this function, the
programme durations and the main
wash temperatures will increase. The
water and energy consumption may
increase.
If this function is switched on, it will be
applied to all programmes until it is
switched off again.
114
Extra dry
You can select this function in order to
increase the programme drying
performance.
If you activate this function, the
programme durations and final rinse
temperatures will increase. The energy
consumption may increase.
If this function is switched on, it will be
applied to all programmes until it is
switched off again.
Hygiene cycle
If you mainly use low temperature
programmes (< 50 °C), there is a risk of
bacteria and unpleasant odours
building up in the wash cabinet (see
"Cleaning and care" chapter, "Hygiene
cycle" section).
To prevent this, the dishwasher will
automatically increase the temperature
in the final rinse of the selected
programme after several low-
temperature programmes have been
run if this programme is selected. This
is to prevent the build-up of residues
and odours.
This programme results in higher energy
consumption.