Miele HG07-W Operating Instructions Manual page 12

Warning and safety instructions

The plastic housing of the water connection contains a solenoid
valve. The housing must not be dipped in water.

There are live wires in the water inlet hose. Do not cut the hose,
even if it is too long.

The integrated Waterproof system offers protection from water
damage, provided that the following conditions are met:
– Installation has been carried out correctly
– The dishwasher is properly maintained and parts are replaced
where this is noticeably required
– The stopcock is turned off during longer absences from the home
(e.g. whilst on holiday).
The Waterproof system will work even when the dishwasher is
switched off. However, the dishwasher must remain connected to
the electricity supply.

The water-connection pressure needs to be between 50 and
1,000 kPa.

A damaged dishwasher could be dangerous. If the dishwasher
gets damaged, switch it off at the mains immediately and call your
Miele dealer.

While the appliance is under warranty, repairs should only be
undertaken by a Miele authorised service technician. Otherwise the
warranty is invalidated.

Miele can only guarantee the safety of the appliance when
genuine Miele original replacement parts are used. Faulty
components must only be replaced by genuine Miele original spare
parts.

During installation, maintenance and repair work, the dishwasher
must be disconnected from the mains electricity supply (switch it off
and withdraw the plug from the socket).
12