Heat Accumulator - Miele HG07-W Operating Instructions Manual

Heat accumulator

This dishwasher is equipped with a heat
accumulator (see "Caring for the
environment" chapter, "Heat
accumulator" section).
Select State
The heat accumulator function can be
switched off if you do not wish to use it.
 Select the
State
 Select the setting you want and
confirm with OK.
Empty manually
You can manually empty the heat
accumulator, e.g. for a longer period of
absence, or before moving the
appliance to a new location.
 In doing so, please ensure that the
dishwasher is properly connected.
 Select the
Empty manually
option.
The process starts straight away.
Software version
You can call up the electronic software
version of your dishwasher for technical
support purposes.
menu option.
menu
Showroom prog.
For demonstration purposes only.
The dishwasher is equipped with a
demo mode for showroom use.
Factory default
You can reset all the appliance settings
and its network configuration to the
factory default settings.
WiFi module settings (where applicable)
have to be reset separately.
Appliance settings
You can use this menu option to reset
all dishwasher settings, except WiFi
module settings, to the factory default
settings.
Network configuration
You can use this menu option to reset
all WiFi module settings to the factory
default settings.
The network configuration should be
reset whenever a dishwasher is being
disposed of or sold, or if a used
dishwasher is being put into operation.
This is the only way to ensure that all
personal data has been removed and
the previous owner will no longer be
able to access the dishwasher.
Settings
115