Kohler MEMOIRS Series Installation Instructions Manual page 3

S
Drill a 1/4" mounting hole at the
mark on the floor, then drill two 1/4"
hanger bolt holes at the marks on
the wall.
S
Mount hanger bolts to the wall so
approximately 1-1/4" (3.2cm) of
each bolt remains exposed.
NOTE: Other fastening devices of
sufficient size and strength may also be
used.
S
Install the faucet and drain to the
lavatory according to the
manufacturer's instructions.
NOTE: Do not fully tighten slip-joint
drain connections at this time.
S
Position the pedestal mounting hole
over the hole in the floor.
S
Secure the pedestal to the floor with
the wood screw and washer. Tighten
the wood screw until it is snug.
CAUTION: Risk of
damage. Do not
Overtightening may cause damage to
the product.
Kohler Co., Kohler, WI U.S.A.
Hanger
Bolts
product
overtighten.
3
Finish Wall
Pedestal
Wood Screw
Washer
A
1007275-2-