Custom Banner - Welch Allyn Spot Vision Screener VS100 Directions For Use Manual

Directions for use
7. Move the file to the top level of the folder structure. For example, if your USB drive
shows upon your computer as the D:/ drive, save the .csv file as D:/spotsubject.csv
or D:/mylocation.csv.
You can now import the file to the vision screener.
Import
Before you import a file, make sure it is on the top-level of the USB drive. You cannot
import files that are in folders.
1. Insert the USB device into the USB port of the vision screener.
2. Select Tools and then Import/Export.
Once the USB device is detected, Import and Export become available for selection
and the USB symbol displays in the upper right black bar next to the wireless
connectivity symbol. The number of import files found appears on the screen.
Note
3. If Import and Export do not highlight within five seconds of inserting the USB drive,
remove the USB, insert it into your computer and remove all files from the drive. Re-
create or recopy the files you want to import onto the drive.
4. Touch Import.
5. To return to the previous screen, touch the X in the upper-left corner.

Custom banner

Welch Allyn offers the ability to add a custom banner to the bottom of the printable
reports. Create your banner using the specifics below:
• Banner files must be named banner.png
• No larger than 1MB
• Image must be 1376 x 240 pixels
To add a custom banner
1. Place the banner.png file on the root/top-level directory of the USB.
2. Insert the USB in the vision screener. Touch Tools, and then touch Import/Export.
Name
SpotSubjects.csv
Import is only available if the vision screener recognizes a
valid import file. If there are no files in the top-level of the
USB drive, Import is not available.
Advanced settings on the vision screener 33
Description
in the subject information in the
SpotResults.csv file.
If the vision screener has a location
specified that is different from the .csv file,
the location specified in the .csv file is
included in the results.
Use this name if if the location is already
specified on the vision screener. If no
location is specified on the device, the
location is not included in the results.