Page 2
Thank you for your purchase We would like to take this opportunity to thank you for choosing Kraus. We hope that you are completely satisfied with your purchase, and enjoy it for years to come. If you have any questions, or require technical assistance, please contact us at 800-775-0703 and one of our representatives will be happy to help.
∅ • Make sure you have all necessary parts by checking the diagram and parts 1 15/16” ∅ list. If any part is missing or damaged, please contact Kraus Customer 50mm) ∅ Service at 800-775-0703 for a replacement • Turn off the hot and cold water supply at the angle stops and turn on the old faucet to release any built up pressure.
Page 4
Diagram and Parts List A. Spray Head E. Check Valve Connector B. Faucet Body F. Weight C. Mounting Hardware G. Hot & Cold Waterlines C1. Rubber & Metal Washer H. Aerator Key C2. Mounting Nut I. Faucet Extender (used for top C3.
Page 6
Step 1: Remove mounting hardware Remove mounting hardware (C) from mounting pipe Step 2: Install faucet and mounting hardware Insert faucet body (B) into hole in countertop or sink. Install mounting hardware (C) from underneath countertop Note: Deck plate assembly (K) can be used to cover preexisting holes...
Page 7
Step 3: Secure mounting hardware Adjust the direction of faucet body (B). Tighten mounting nut (C2) until snug. Tighten mounting screws (C3) to nut with a Phillips screwdriver until snug Step 4: Attach spray hose and counterweight Connect hose (D) to check valve connector (E).
Page 8
Step 5: Connect waterlines Connect waterlines (G) to copper lines and angle stops. Tighten both ends of waterlines with an adjustable wrench until snug. Turn on angle stops and check for leaks (DO NOT TURN FAUCET Step 6: Flush spray hose Remove spray head (A) from hose (D).
Step 7 : Check for leaks Check for leaks at the Hexagon Nut connections Cold Water Water Close 90˚ 25˚ Push Left Open Hot Water Care & Maintenance *To keep the product clean & shining, follow the steps below: Rinse with clean water & dry with a soft cloth Do not clean with soaps, acid, polish, abrasives, or harsh cleaners Do not use cloth with a coarse surface Unscrew the aerator and clean when necessary...
Trouble - Shooting If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps: P R O B L E M C A U S E A C T I O N Leaking from faucet Locking nut (10) may Remove cover button...
Page 12
P R O B L E M C A U S E A C T I O N Leaking between spray Spray head (1A) may be Tighten spray head (1A) head and hose loose or washer (2) may by hand until snug. not be seated correctly Make sure washer (2) is in the hose connection...
Page 13
Maintenance - Cartridge Replacement Step 1: Remove button located at the top of the handle. Loosen the set screw with a hex wrench. Remove the handle and unscrew cartridge cover by hand Step 2: Unscrew the locking nut with an adjustable wrench.
If Kraus is unable to provide a replace- ment and repair is not practical or cannot be made in timely fashion, Kraus may elect to refund the purchase price in exchange for the return of the product.
Page 15
NON-APPLICABILITY OF THIS WARRANTY By the purchase and use of our products, you agree that Kraus is not liable for incidental, consequential or special damages associated with the return, replacement, installation or use of your product. This includes freight costs, cartridge replacement, labor, travel time,...