Installing The Lens Supporter - Optoma A16 UST Series Installation Instruction

Installing the lens supporter

An additional lens supporter is required for this lens. Complete the following steps to install the lens supporter.
1. Place the lens and projector upside-down on the cushioned surface.
2. Use a Philips #2 screwdriver to fasten the lens mount bracket on to the UST lens with two M3 x L8
screws.
Notee: Ensure the arrow on lens mount bracket is facing out from the lens mount.
Lens mount bracket
3. To avoid the lens supporter touching the surface, rotate the adjustment feet counter-clockwise for at least
5 turns.
M3 x L8 screws
UTS Lens
English 7