Boresight Adjustment - Optoma A16 UST Series Installation Instruction

Boresight adjustment

Notee: If further tuning is required, follow the steps below. Otherwise, move to the next section.
To complete fine tuning of the image, adjust the boresight gears using the L shape tool. Make sure that the
boresight extenders are installed.
1. Adjust boresight gear B using the L shape tool to focus screen point 4 and 7.
2. Adjust boresight gear C using the L shape tool to focus screen point 6 and 9.
3. Adjust Zoom/Focus to make screen point 1 to 3 clear.
4. Adjust boresight gear A using the L shape tool to make screen point 8 visible.
5. Repeat steps 1 - 4 to balance center and corner resolution.
1
4
7
12 English
2 3
5 6
8 9
A
B
C