Attaching The Lens Supporter To The Ust Lens; Removing The Ust Lens - Optoma A16 UST Series Installation Instruction

Attaching the lens supporter to the UST lens

After image adjustment is completed, attach the lens supporter to the UST lens. Follow the steps below to complete
the processes.
1. Attach lens mount bracket to the bracket.
2. Fasten the two M3 X L8 hex screws using the 2.5 mm allen key without putting excessive force on the
UST lens, bracket and lens supporter.
3. Fasten the M3 X L8 hex screws fully using the 2.5 mm allen key to connect the bracket and lens
supporter in to the final position.
Notee: To avoid affecting the projected image, do not use any force whilst fastening the screws.

Removing the UST lens

Follow the steps below to remove the UST lens.
1. Press the lens release button.
Release button
English 13