Use And Intended Area Of Application; Permitted Attachments - FLIR A310 ex Series User Manual

4 Use and Intended Area of Application

The protective enclosures are approved for use with infrared cameras in potentially explosive
areas categorized as zone 1 and 2 and zone 21 and 22.
Only use the device in line with its intended use
Failure to use the device in line with its intended use will render the manufacturer's liability and
warranty void.
Only use the device in line with the operating conditions stipulated in these operating instructions.
In potentially explosive atmospheres, the device must only be operated according to these
operating instructions.

4.1 Permitted Attachments

The following camera and lens combinations can be used.
Camera
Flir A3XX,
SC3XX,
A3XXsc
Flir A615,
SC6XX,
A6XXsc
AT IRS-X-GigE
IRS-X-GigE
Xenics Serval-X-GigE
Flir AX5
Flir G300A
Installation work must only be carried out by specialist personnel
The attachments must be assembled by the manufacturer or by personnel authorized by the
manufacturer.
Operating Instructions IRCamSafeEX-AXC
Ex d Enclosure for Infrared Cameras
Lens
Without ancillary lens
45° ancillary lens, focal length = 10 mm
15° ancillary lens, focal length = 30mm
6° ancillary lens, focal length = 76mm
90° ancillary lens, focal length = 4mm
15° lens, focal length = 41.3 mm
25° lens, focal length = 24.6mm
45° lens, focal length = 13.1mm
WFOV lenses
Lens, focal length = 11 mm
Lens, focal length = 25mm
Lens, focal length = 35 mm
Lens, focal length = 60mm
Lens, focal length = 100mm
Lens, focal length = 35–105 mm
WFOV lenses
Focal length = 23 mm, F = 1.5
Focal length = 38 mm, F = 1.5
5 AT-Automation Technology GmbH
AXC
model
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X