Dometic FreshJet Series Quick Start Manual page 23

FreshJet
See fig. c
➤ Choose the suitable seal in accordance with the following table:
Roof thickness
25 – 30 mm
30 – 40 mm
40 – 60 mm
➤ Position the seal with the adhesive side on the ADB.
➤ Fasten the fastening frame (3) on the underside of the roof air conditioner with
the 4 screws supplied.
See fig. d
A
NOTICE! Damage hazard
Tighten to the specified torque.
➤ Tighten the screws using a torque spanner and a fastening torque of 2.5 Nm.
8.8 Installing the air outlet unit
See fig. e
➤ Install the air filter in the specified sequence.
See fig. f
➤ Attach the air outlet unit magnetically to the fastening frame.
EN
Seal type
15 mm
30 mm
45 mm
Installation
17