FreshJet
8.7
Installing the roof air conditioner with ADB
A
NOTICE! Damage hazard
Observe the structural strength of the roof of the vehicle. The roof of the
vehicle must be able to bear the weight of the roof air conditioner. The
roof must not be indented or deformed by the weight of the unit, even
over a longer period of time.
See fig. 0
➤ Lift the roof air conditioner onto the roof of the vehicle.
➤ Position the roof air conditioner over the installation opening.
Observe the direction of travel.
Attaching the roof air conditioner
See fig. a
➤ Position the roof air conditioner into the mounting opening using the conical
noses.
Electrical connection
The complete circuit diagram can be found in fig. g:
Item
Description
1
230 Vw mains
2
Compressor
3
Fan condenser
4
Fan condenser (FreshJet3200 only)
5
Fan evaporator
6
Battery
7
Remote socket
8
Temperature sensor
9
Heating (FreshJet1700, 2200 only)
10
Heat Pump (FreshJet3200 only)
11
Soft Start (FreshJet2200,3200 only)
EN
Installation
15