ROLLAND ROLLFORCE Instruction Manual page 36

General Verifying
Rolling ½ tandems case, rods tandem
Verify and tighten all the nuts of axles coupling flange and the lifting rods if there are any
(following the order on sketch 2)
Grease the different articulating axles as well as the spring ends in their slide conveyor.
(Sketch 1).
Greasing
Greasing
Scheme 1
Case of balance rolling or Rollfast
Check there is no backlash in the balance axle.
Grease the different points (14 for each balance axle or Rollfast)
Notice originale : Français
Tightening
36
1
4
3
2
Scheme 2
14 greasing points along this axle
NT0002 V –p – 03/2014