Security Menu - Panasonic CF-Y5 Reference Manual

Setup Utility

Security Menu

Execute-Disable Bit Capability
• [Enable] indicates that this computer supports hardware-based Data Execution Prevention (DEP).
It should usually be set to [Enable].
Password on boot
SD Startup
• Only when [Password on boot] is set to [Enable] and one or more SD card is registered
SD Setting Method
• Only when [SD Startup] is set to [Enable]
Clear registered SD card
Set Supervisor Password
Setup Utility Prompt
• When [Setup Utility Prompt] is set to [Disable], the message "Press F2 for Setup / F12 for LAN" is
not displayed on [Panasonic] boot screen. However, F2 and F12 will work even if the message
is not displayed.
Boot First Menu
Hard Disk Lock
User Password Protection
Set User Password
(Only for models with TPM)
Embedded Security (TPM) Sub-Menu
• Only for model with TPM
• For information on TPM, input [c:\util\drivers\tpm\README.pdf] in [start] - [Run] and refer to the
installation manual of "Trusted Platform Module (TPM)".
Computrace (R) Sub-Menu
82
(Underlined items are the factory presets.
Disable
Enable
Disable
Enable
Disable
Enable
Leave Set
Set and Eject
Enter the sub-menu.
Enter the sub-menu.
Disable
Enable
Disable
Enable
Disable
Enable
No Protection
Protected
Enter the sub-menu.
Enter the sub-menu.
Enter the sub-menu.
)