Table of Contents
Advertisement
HUAWEI TP1102 Telepresence
Installation Guide
Figure 6-5 Codec
Procedure
Step 1 Align the codec fan with the heat dissipation vents and keep the Power button upwards.
Step 2 Remove the bottom right cushion inside the rack.
Step 3 Remove the four screws on the right side of the codec with an Allen wrench, as shown in
6-6.
Figure 6-6 Removing the screws on the right side of the codec
Step 4 Install the cushion to the codec.
Step 5 Insert the codec into the cable trough, as shown by No. 1 in
Step 6 Tighten the captive screw on the cushion to secure the codec.
----End
Issue 03 (2013-07-22)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Installing the Equipment in the Rack
Figure
6-3.
Figure
39
Advertisement
Table of Contents
