Table of Contents
Advertisement
HUAWEI TP1102 Telepresence
Installation Guide
Context
Mounting bracket assembly installation for the TP1102-65 and TP1102-55 is similar. The
mounting bracket assembly installation for the TP1102-55 is used here as an example.
The mounting bracket assembly is heavy and has many long cables. Exercise caution during
installation.
Procedure
Step 1 Refer to the HUAWEI TP1102-55 Telepresence System Connection Diagram to connect cables.
l Connect the power, serial, and video cables to the camera.
l Connect the power cable to the HD display.
l Connect the network and power cables to the wireless router.
After you connect all cables, arrange them neatly and tie them with cable ties.
Step 2 Install the mounting bracket assembly along the slots on the columns of the rack, as shown in
Figure
to watch the alignment of screw holes so that the mounting bracket can be properly inserted into
the slots.
Issue 03 (2013-07-22)
DANGER
CAUTION
5-9. It is recommended that you arrange for another person to stand behind the HD display
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Installing the Mounting Bracket Assembly
31
Advertisement
Table of Contents
