Low-energy ventilation unit with heat recovery (13 pages)
Summary of Contents for Vallox 096 SE R
Page 1
53 kg Ventilation power adjustment - Control panel control - CO and %RH control - Remote monitoring control (voltage signal) Options - CO sensor - %RH sensor - Insulated attic fl oor penetration plate - Ceiling mounting plate Vallox 096...
Making the unit ready for operation be used in for example public saunas and swimming pools. The 1. Connect the plug to the mains supply. VALLOX 096 SE is now program aims at keeping humidity at the setpoint. The setpoint ready for operation.
Page 5
3.13 Address of control panel to contact Vallox Maintenance. The adjustment is made with the + and – buttons. See the table for the factory setting. The address of the control panel is Panel address changed with the + and –...
Page 7
Filters Before starting maintenance operations When you open the VALLOX 096 SE unit, the security switch (S) turns voltage off. In spite of this, disconnect the plug of the unit. Disconnect the plug of the VALLOX 096 SE unit before starting maintenance operations.
Page 13
Wall mounting VALLOX 096 SE is mounted on the wall with a mounting plate as shown in the adjacent fi gure. Make sure that the unit is horizontally level after Take into account that the unit rises mounting.