Siemens SIMATIC HMI Series Getting Started page 44

Commissioning the HMI device
4.2 Transferring a project
Procedure
Proceed as follows:
1. Connect the HMI device to the configuration PC.
2. Configure the data channel in the Control Panel of the HMI device.
3. To set the transfer mode, click "Transfer" in the Loader.
44
SIEMENS
The configuration PC and HMI device are connected. If Windows XP is installed on the
configuration PC, you are prompted to install the driver. Use the "Automatic search"
option. The USB driver is installed automatically as of Windows 7.
SIEMENS
Migration Guide Comfort Panels
Getting Started, 03/2011, A5E03478626-01