pottery barn kids PRESTON Quick Start Manual page 4

5. Attach (C) to the desktop with the pre-drilled holes and wooden dowels aligned, as seen below.
6. Tighten the bolts as shown in picture A-A below. Do not fully tighten. Leave flex between (C) and (A) to attach (D)
7. Attach (D) to the assembled leg panels, with the oval cut-outs facing outwards, as seen below.
8. Tighten the bolts as shown in picture B-B below. Do not fully tighten.
9. Check alignments and tighten all connecting bolts. Do not over tighten.
Picture A-A
10. Carefully turn the assembled Desk upright.
11. Place the Drawer Boxes (removed in Step 1) back into the assembled Desk.
12. Adjust the levelers found on the bottom of the legs (up or down) to keep the desk level when needed.
13. NOTE: Installation of the Anti Tip Kit is REQUIRED. Please follow the separate instructions to secure the Desk to
the wall- using the tipping-restraint kit included.
Care Instructions:
•
Dust often using a clean, soft, dry, and lint-free cloth.
•
Blot spills immediately and wipe with a clean, damp cloth.
•
We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our lacquered finish.
•
Hardware may loosen over time. Periodically check to make sure all connections are tight.
Re-tighten if necessary.
Date: 2015-Mar-26
Rev:
X4
Thank you for your purchase
Stores | catalog | www.potterybarnkids.com
USA 1.800.290.8181
F 2x
G 4x
H 6x
I 6x
J 2x
X2
Picture B-B
Page 4 of 4