Programming Menu - Farfisa TD2000RA Manual

PROGRAMMING
The most important default settings are reported in the following;
to change them or to store new parameters please proceed as
indicated in the next paragraphs.
Default settings
- System password = 0039
- Address of a Door Station = 231
- Door lock operation time = 1 sec.
- Auxiliary relays operating time = 1 sec.
Enter programming mode
To enter the programming mode dial "00" +
WORD", enter the System Password (default 0039) +
line of LCD shows "PROGRAMMING", while the second line shows
the first function of the Programming Menu. With arrows
it is possible to browse the menu, while
Exit the programming mode
To exit the programming mode it is necessary to press several
times (it depends from where you are in the menu) until on
LCD appears "Enter a number... or select an user...".
How to use the keypad
To program the device use the keypad of the push-button panel
During the programming phase keys, besides the function reported
on them, assume also other meanings as described in the following:
confirms the selection and forwards you to the next func-
tion;
cancels the selection and backwards you to the previous
function, pressed several times (it depends from where
you are in the menu) exits the programming mode. While
entering characters moves backward the cursor and cancel
the character entered.
Browses upward the programming menu. Scrolls the al-
phabet backward while entering characters;
Browses downward the programming menu. Scrolls the
alphabet forward while entering characters;
Browses rightward the programming menu. Moves the
cursor to the right while entering characters;
Browses leftward the programming menu. Moves the cur-
sor to the left while entering characters;
Switches from upper case to lower case while entering
characters.

PROGRAMMING MENU

In programming mode, the first line of LCD shows the name of
the programming we are going to execute, while the second line
shows the functions that can be programmed; entering the pro-
gramming mode, functions that can be selected are:
With
, LCD shows "PASS-
the programming mode.
, the first
Language
or Available languages are:
confirms the selection.
Select language with
Directory
Alphabetical list of users; directory has two different formats:
- during normal operations of the system (in the list are reported
- in programming phase (in the list are reported all the users in-
of the two following fields: flat address or password.
the previous menu.
In the directory menu the following functions are available:
With
the programming mode.
- Language
- Directory
- System
- Miscellaneous
- Default
or arrows it is possible to scroll the functions, while
key confirms the selection.
- Italian
- English
- French
- Spanish
- Polish
or
key backwards you to the previous menu.
only users who have the flat address);
cluding those who have a password, but not the flat address);
Attention: users must always have a name and at least one
key forwards you to programming;
- New user
- Modify a user
- Delete a utente
- Delete all users
- Recovery users
- Download
- Upload
- Format memory
or arrows it is possible to scroll the functions, while
key confirms the selection.
New User
Each new user (max 800) must be stored in the directory.
forwards you to programming (if 800 users are already stored,
the system doesn't allow you to enter the menu " New User");
key backwards you to the previous menu. The following pa-
rameters must be programmed for each user:
- Enter Name
Name of the user, 20 characters are available that can be ei-
ther letters or numbers; to enter the name refer to "How to
use the keypad", then press
ming. Attention: the name of the user must be always
programmed.
- Enter Address
In "a wide range" DUO system, the user address is composed
of two parts:
- Block address: block of the system to which the user be-
longs, from 01 to 99; enter the block address and then press
to move to the next programming; block 00 is reserved
for the compatibility with the traditional DUO devices.
- Flat address: in each block of the system, the users must be
identified by an univocal address from 001 to 200; enter the
key backwards you and exits
arrows and press to confirm.
key backwards you to
key backwards you and exits
to move to the next program-
Mi 2513/2
key
- 14 -