Siemens SENTRON PAC3200 Manual page 66

Operation planning
4.1 Operation planning
Installation space and ventilation
Sufficient clearance must be maintained between the device and neighboring components in
order to comply with the permissible operating temperature. You can find dimension
specifications in the "Dimension drawings" chapter.
Plan additional space for:
● Ventilation
● Wiring
● RJ45 plug connector and cable feed on the top of the device
● Optionally connectable expansion module on the rear of the device, including connector
Environmental conditions
Only use the SENTRON PAC3200 device where the environmental conditions permit its
operation:
Temperature range
•
•
Relative humidity
Operating altitude above sea level
Degree of pollution
Degree of protection according to IEC 60529
•
•
Temperature compensation
To avoid condensation, the device must be stored at the operating location for at least 2
hours before power is connected.
See also
Dimension drawings (Page 167)
66
and cable feed
CAUTION
Ensure ventilation
Please ensure that the ventilation slots of the housing are not obstructed. The wiring,
cable feed or other components must not obstruct ventilation.
Operating temperature range
Storage temperature range
Front
Rear
- 10 °C through + 55 °C
- 25 °C through + 70 °C
95% at 25°C without condensation (normal
conditions)
Up to 2000 m
2
IP65
IP20, NEMA 1A
Manual, 02/2008, A5E01168664B-04
SENTRON PAC3200