Dect Ii Phone - Phonak Virto B-Titanium Series Training Manual

Transferring existing contacts
If you already have a DECT-compatible cordless phone,
it may be possible to transfer your contact data to the Phonak
DECT phone.
To do so, the existing handset must be logged in to the
Phonak base first. Refer to the user guide of your current handset
and log it into the Phonak base ( Chapter 5.10).
Transfer the contacts of your existing handset to the
Phonak base.
Your contacts can remain on the Phonak base or be transferred to
the Phonak handset.
Your existing phone must support the transfer of
contact data. Please refer to your phones user guide for
more information.
Setting the volume
Use the volume up / down keys
to set the volume during a conversation.
The volume setting will be indicated on the
display and saved automatically.
The volume setting controls the acoustic and wireless signal
at the same time.
The volume Boost key
By pressing the Boost key on the side during a
phone call, the handset will provide up to
15 dB extra volume in addition to the normal
volume. The Boost symbol will appear on the
display.
Set the volume for the Boost-mode using
the volume up / down keys +/-
This mode is not available in hands-free or headset mode.
72 Phonak VA DALC Training Guide
+/- on the side
Mike
1:08
.
By pressing the Boost key
switches back to the normal volume range and the
volume Boost symbol disappears.
A new telephone conversation always begins in normal
volume mode.
Please tell other people using your phone about this setting.
People with normal hearing may find it very loud.
Setting ringtones
Ringtones are not transmitted wirelessly to your
hearing aids.
Choose your individual ringtones in the Audio
settings menu:
S Press the key to get to the
menu. Press .
S Press the key to get to the sub menu
S Press the key to get to External
again, the handset
Audio settings
Ring tones. Press
call. Press .
.