Sony LH61 Instruction Manual page 18

Display of spot position and operation mode indicators
Name of part Function
Depress it to select English (in
inches) or metric (in millimeters)
display.
in/mm selector key
Displays for each axis a positive
or negative value of 7 digits with
unnecessary leading zeros
Digital display
blanked out. An alarm is also
displayed in case of trouble.
Mode indicators ABS
Indicates the absolute mode is
set. The distance from the spot
position to the datum point
initially set is displayed.
ABS is indicated also when a
datum point is established.
Flashes when multiple datum
points are used.
INC
Indicates the incremental mode
is set. In this mode, incremental
p o s i t i o n i n g i s m a d e w i t h
keys and preset key .
RESET P
Flashes when multiple datum
points are used.
/
Indicates the display unit is
ready for operation commands.
Flashing indicates an input
wait, a processing wait or
similar standby state.
Indicates the detection mode of
absolute zero point of scale.
ø
Indicates that the resolution is
set to diameter display mode.
mm
mm or in: Indicates the display
is in millimeters or inches.
BH
Mode indicators (LED)
Indicates the bolt hole circle
function mode.
PRG
Indicates the program function
mode.
REF
Indicates the absolute zero
point function mode.
10