Program Mode Selection - Sony LH61 Instruction Manual

5-14-1. Program mode selection

F F
0
SET
L
When each mode is entered, the previous program No. is displayed.
When starting the No.1 program
SET
1
L
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — Or — — — — — — — — — — — — — — — —
When not changing the program No.
SET
L
50
There are three program modes: input/edit mode "
and program execution mode "
and then perform the respective operations.
Operating Procedure
Press the key twice to select the
F
program mode.
The PRG mode LED lights.
Press the key to advance the mode.
0
Press the key to restore the mode.
Press the Function setting key to set the
mode.
The arrow indicator goes out.
Press the key and Function setting
1
key.
Press the Function setting key.
Note
• If the datum points are not set, ("0" is
displayed), set them as necessary.
• Not necessary in the input/edit mode.
All 0's are entered.
After finishing these operations, proceed to the operations for the program input/edit mode,
playback program mode or program execution mode.
", playback program mode "
". Before starting operations, you should select the mode
Display
(Input/edit mode)
(Playback program mode)
(Program execution mode)
After approx. 2 seconds Lights
mm
mm
mm
",
BH PRG REF
Flashes
BH PRG REF
Flashes
BH PRG REF
Flashes
BH PRG REF
Flashes
BH PRG REF
Lights up
BH PRG REF
Flashes
BH PRG REF
Lights up
BH PRG REF
Lights up
BH PRG REF
ABS
Lights up
ABS
ABS