Page 2
Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”). This user manual (hereinafter referred to be “the Manual”) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision.
Page 3
Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
Page 4
Applicable Models This manual is applicable to the model: LCD Monitor. Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Provides additional information to emphasize or supplement important points of the main text. Indicates a potentially hazardous situation, which if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results.
Table of contents FOR YOUR SAFETY ..................1 Precautions ....................1 Special precautions for LCD monitor ............2 BEFORE YOU OPERATE THE MONITOR ............3 Installation instruction ................. 4 Cable connection ..................5 Adjusting the viewing angle ................. 6 Operating instructions ................7 General operating instructions ..............
LCD Monitor User Manual FOR YOUR SAFETY Please read this manual carefully before using this monitor. Please keep it properly for further refer- ence. Warning: To avoid fire or electric shock, the monitor must not be exposed to the rain or moisture. The monitor has dangerous high voltage inside.
LCD Monitor User Manual device safely. Do not damage the safety function of the earth plug. • Please unplug the device during thunderstorm or when the device is not used for a long time. This avoids damage by surge voltage. • Do not plug into a power strip or extension cord;...
LCD Monitor User Manual BEFORE YOU OPERATE THE MONITOR Features • 709mm (28”) TFT LCD color monitor • Clear display • Recommended resolution: 1920 x 1080@60Hz (VGA), 3840 x 2160@60Hz (HDMI2.0/ DP, graphics card support required) Package contents This product package includes the following objects: 1. LCD monitor 2. User manual 3. Power cord...
LCD Monitor User Manual Installation instruction Installation: 1. Open the package, take out the LCD monitor and lay the monitor flat on a table. 2. Assemble the LCD monitor and base as shown. Tighten the screw clockwise. Disassembly: 1. Lay the LCD monitor flat on a table as shown: 2. Loose the screw counterclockwise and remove the base.
LCD Monitor User Manual Cable connection Signal cable • Signal cable connection: Insert a 15-pin signal cable into the back of monitor and the VGA port of computer. • HDMI cable connection: Insert a 19-pin HDMI cable into the back of monitor and the HDMI port of computer.
LCD Monitor User Manual Adjusting the viewing angle • For the best view, it is recommended that you stare at the front of the screen and adjust the monitor angle for your preference. • Hold the base tight when adjusting the monitor angle to avoid pushing down the monitor.
LCD Monitor User Manual OPERATING INSTRUCTIONS General operating instructions Press the power button to turn on or off the monitor. Other control buttons are on the side of the monitor. Adjust the image for your preference by changing these settings. • Connect the power cable.
LCD Monitor User Manual Front panel control • Power button: Press it to turn on or off the monitor. • Power indicator: Blue - "Power on" mode Orange - "Standby" mode Indicator off - "Power off" mode • Menu / Enter: Turn on the OSD menu or check the function adjustment.
LCD Monitor User Manual How to adjust settings 1. Press the "Menu" button to display the OSD menu. 2. Press + or - to browse the entire menu. After highlighting the items you need, press the "Menu" button to open them. 3. Press + or - to browse the entire sub-menu.
LCD Monitor User Manual Adjusting the picture Description of the functions of LED control button Main menu Main menu Sub-menu items Sub-menu Description items icons Contrast Contrast adjustment (对比度) Brightness Backlight adjustment (亮度) Standard Standard mode (标准) Text Text mode (节能)...
Page 16
LCD Monitor User Manual Main menu Main menu Sub-menu items Sub-menu Description items icons Call the "Warm" color Warm (暖色) temperature setting from the EEPROM. Call the "Normal" color Normal (正常) temperature setting from the EEPROM. Call the "Cool" color Color Temp Cool (冷色)...
LCD Monitor User Manual Plug and play Plug & Play features of DDC2B This monitor complies with the "VESA DDC Standard" and it is equipped with VESA DDC2B capabilities. This monitor notifies the host system of its information on identification and display function, depending on the DDC level.
LCD Monitor User Manual TECHNICAL SUPPORT (FAQ) Problem Possible solution • Please check whether the power switch is "ON". The LED of power supply does not light up. • Connect the power cable first. • Check whether the computer system is compatible with Plug &...
Page 19
LCD Monitor User Manual • Please check the connection of the signal cable. If the connector is loose, please fasten the screw on the connector. No signal • Please check if the pin of the signal cable is broken. The display mode setting of the computer is wrong. The input signal is not supported.
LCD Monitor User Manual APPENDIX Specifications Drive system 28” TFT color LCD monitor LCD panel Size 709 mm diagonal lines Pixel pitch 0.16mm (H) × 0.16mm (V) RGB analog signals (VGA) Video signal Digital signals (HDMI2.0/DP) Input Horizontal frequen- 30KHz – 99KHz (VGA), 30KHz –...
Page 21
LCD Monitor User Manual Power Supply 100-240V ~, 1.5A, 50/60Hz Operating temperature: 0° to 40°C Operating environment conditions Storage temperature: -20° to 60°C Operating humidity: 5% to 85% Dimension 659.7 (W) x 390.9 (H) x 49.3 (D) mm Weight (net weight): 5.6 kg Power button Menu/Enter...
LCD Monitor User Manual Connector pin assignment Color display signal cable (15-pin) Pin no. Function Pin no. Function Green Ground Blue Ground Ground DDC serial data Testing cable Horizontal synchroniza- tion signal Red ground Vertical synchronization signal Green ground DDC serial clock Blue ground Color display signal cable (19-pin) Pin no.
Page 24
LCD Monitor User Manual Pin no. Function Pin no. Function ML_LANE3_N ML_LANE0_P ML_LANE3_P ML_LANE2_N AUX_CH_P ML_LANE2_P ML_LANE1_N AUX_CH_N ML_LANE1_P RETURN (GND) ML_LANE0_N DP_PWR (3.3V, 500mA)