Page 2
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.
Page 3
LCD Monitor User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
Page 4
LCD Monitor User Manual Applicable Models This manual is applicable to the model: LCD Monitor. Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Provides additional information to emphasize or supplement important points of the main text.
LCD Monitor User Manual Chapter 1 Overview Overview The LCD monitor is a reliable surveillance display with LED backlit technology, excellent color reduction and image processing, and true display of video details. Multiple interfaces are able to meet various surveillance environments, and build-in speaker is convenient to audio play. The monitor is an ideal choice for security and surveillance application.
LCD Monitor User Manual Chapter 2 Panels and Connections Interfaces Figure 2-1 Rear Panel of Device Table 2-1 Description of Rear Panel Interface Description DC 24V 24 VDC power input HDMI IN HDMI digital signal input VGA IN Analog VGA input BNC IN BNC input BNC OUT...
LCD Monitor User Manual Remote Controller Refer to the following figure and table for the remote controller descriptions. Table 2-3 Button Description Function On/Off switch, turn on/off the monitor Mute key, for turning off the sound of the monitor MENU Enter main menu FREEZE Freeze the image...
LCD Monitor User Manual Chapter 3 System Configuration Input Source Selection Turn on the display unit when the power supply is on and input source is confirmed. Step 1 Press SOURCE on the remote controller to enter the menu as shown below. 22 inch LCD display unit includes 4 input sources as AV, HDMI, DVI, VGA and USB signal.
LCD Monitor User Manual Image Mode User Brightness Contrast Color Sharpness Figure 3-2 Image Mode Press ◄ or ► to switch it to Standard/Gentle/Dynamic/User mode. Different parameters of Step 3 contrast, brightness, color, hue and sharpness are provided for different image modes. (Optional) When you select the User mode, press ◄...
LCD Monitor User Manual Lighting Normal Mode Figure 3-3 Lighting Mode Step 4 Press MENU again to complete the settings and back to the main menu interface. 3.2.3 Configuring Audio Settings You can switch the mute on/off and adjust the volume. On the main menu, press the ▲...
LCD Monitor User Manual The VGA parameter settings are valid only for the VGA input source. Auto Adjust On the main menu, press the ▲ and ▼ buttons on the remote control to select the VGA Step 1 Parameter. Step 2 Press OK to enter the VGA parameters settings interface.
LCD Monitor User Manual Press ◄ or ► to switch the overscan to On/Off. Step 3 Step 4 When the overscan is selected to On, you can set values of the left edge, right edge, top edge and bottom edge from 0 to 100. The value of overscan is the pixel value of certain edge.
LCD Monitor User Manual System Information and Maintenance 3.5.1 Upgrading the Device Before you start Insert the USB flash drive with the update file to the device before you upgrade the device. On the main menu, press the ► on the remote control to enter the Maintenance interface. Step 1 Step 2 Press OK to enter the maintenance settings interface.
LCD Monitor User Manual 3.5.4 Enabing/Disabling Auto Input Source The input signal source can be automatically detected by the device and switched to the connected signal source on the screen. Step 1 On the Maintenance interface, select Auto Input Source. Press ◄...
LCD Monitor User Manual Fan Mode Fan Temp(° C) Overheat Alarm Alarm Temp(° C) Figure 3-10 Temperature Monitor General Settings 3.6.1 Configuring OSD Settings You can set the language and OSD duration on the menu. On the main menu, press the ► on the remote control to enter the general settings Step 1 interface.
LCD Monitor User Manual Step 5 Press MENU again to complete the settings and back to the main menu interface. 3.6.2 Selecting Screen Saver Mode The screen saver allows you to set the screen mode and the auto sleep mode when the monitor has no signal input.
LCD Monitor User Manual Backlight Low Energy Figure 3-13 Backlight Settings Step 3 Press MENU again to complete the settings and back to the main menu interface. 3.6.4 Configuring Image Freezing Image freeze feature refers to freezing the current image on the monitor. On the main menu, press the ►...
LCD Monitor User Manual Playing External Files You can play the external files on the monitor, including the photo, movies, music or txt files, etc. Before you start Insert the USB flash driver with the external files to the device before operating the following steps.