Dji Gs Rtk App; Dongle; Firmware - dji PHANTOM 4 RTK Disclaimer And Safety Manuallines

DJI GS RTK App

1. Be sure to fully charge the remote controller before launching the DJI GS RTK app.
2. Read all prompted safety tips, warning messages, and disclaimers carefully. Be familiar with the related
regulations in your area. You are solely responsible for being aware of all relevant regulations and flying
in a way that is compliant.
a. Using the Auto-take off and Auto-landing features.
b. Setting the altitude beyond the default limit.
3. Land your aircraft immediately if there is an alert shown in the app.
4. Examine and check all warning messages on the Aircraft Status List displayed in the app prior to each
flight.
5. Cache the map data of the area where you intend to fly the aircraft by connecting to the Internet before
each flight.
6. The app is designed to assist your operation. Please use your sound discretion and DO NOT rely on the
app to control your aircraft.
7. Your use of the app is subject to the DJI GS RTK app Terms of Use and DJI Privacy Policy. Please read
them carefully in the app.

Dongle

1. A dongle and SIM card are required for some product features in the DJI GS RTK app and users will
bear the cost of these extras.
2. Be sure to use a DJI approved dongle.
3. Use the dongle and the SIM card according to their manuals.
4. DJI accepts no liability for accidents caused by the loss of user data or aircraft malfunctions originating
from third party dongles and SIM cards.
5. Only use SIM cards that are compatible with the dongle.
6. Make sure you mount the dongle and the SIM card correctly, or else related functions will not be
available.

Firmware

To avoid serious injury to children and animals, observe the following rule:
Keep children and animals at a safe distance during any firmware upgrade, system calibration, and
1.
parameter setting procedures.
1. For safety, always update the firmware to the latest version when an upgrade notification is shown in the app.
2. Only use official DJI firmware.
3. Be sure to update the remote controller's firmware to the latest version after you update the aircraft's firmware.
4. The remote controller may become unlinked from the aircraft after updating. Re-link the remote controller and
aircraft.
5. Be sure to check all connections and remove the propellers from the motors before performing the firmware
update.
©
2018 DJI All Rights Reserved.
9