Front Wheel - Yamaha Jupiter Fi T115FS-5 Owner's Manual

2
ZAUV0369
1. Inner lens
2. Screw
6. Insert a new bulb into the
tail/brake light socket, push it in,
and then turn it clockwise until it
stops.
7. Insert a new bulb into the rear turn
signal socket.
8. Install the inner and outer lenses
by installing their screw. NOTICE:
Do not overtighten the screws,
otherwise the lens may break.
[ECA10682]
9. Install the cover.
10. Install the panel.
1

Front wheel

To remove the front wheel
WARNING
To avoid injury, securely support the
vehicle so there is no danger of it
falling over.
1. Place the motorcycle on the cen-
terstand.
2. Disconnect the speedometer ca-
ble from the front wheel.
2
ZAUV0370
1. Speedometer cable
2. Axle nut and washer
Periodic maintenance and adjustment
EAU24361
EAU57421
EWA10822
1
7-32
3. Remove the axle nut and the
washer.
4. Pull the wheel axle out, and then
remove the wheel. NOTICE: Do
not apply the brake after the
wheel and brake disc have been
removed, otherwise the brake
pads will be forced shut.
To install the front wheel
1. Install the speedometer gear unit
into the wheel hub so that the pro-
jection on the wheel hub fits in ei-
ther slot of the speedometer gear
unit.
1
ZAUV0371
1. Speedometer gear unit
2. Lift the wheel up between the fork
legs.
[ECA11073]
7