Bartscher PRO II 40T Manual page 20

Heating bowl
o The heating bowl of the device must be thoroughly cleaned every week, especially in
case of daily use of the device.
o The accessories supplied with the device include scraper for removing scale
deposits from the heating bowl in the water tank bottom.
NOTE!
Always use only included scraper for removing the scale deposits!
o Put the steel wool cloth soaked in soap or
thin dishcloth on the heating bowl.
o Put the narrow end of the scraper into the
heating bowl.
o The heating bowl is cleaned by rotating
the scraper multiple times. When it is
clean, the metal shines.
o After cleaning rinse the water tank thoroughly to
remove all residuals of soap and cleaning agents.
Descaling
CAUTION!
The coffee machine should be regularly descaled to extend its life span and
assure good quality of coffee.
The complaints will not be taken into consideration when the device is not
periodically descaled –according to the instructions–.
Such claims are not covered by the warranty!
o The device is equipped with red descaling indicator
hardness of used water the indicator may be activated after some brewing cycles,
which indicates that the device must be descaled. At the same time the overheating
protection is activated and the device is turned off.
o We recommend descaling of the device with our tested coffee machine descaler
"Quick descaler for coffee machine":
Code-no.: 190065; packing unit: 30 bags per 15 g).
Scale deposit
scraper
Heating bowl
.
Depending on the
- 41 -