Dd
4.0 Connector and Indicator Functions
Model U3CAT6-L
1)
Power LED: LED is SOLID ON when DC power is supplied. LED OFF
when no power is supplied.
2)
Mode LED: Reserved for manufacturer use.
3)
Config: Reserved for manufacturer use.
4)
Status LED: LED is SOLID ON when system is functioning normally. LED
BLINKS during boot OR to indicate a temperature warning in unison
with LINK, USB2, and USB 3 LEDs.
5)
Link LED: LED is SOLID ON when the Local extender is linked to a
Remote extender. LED is OFF when there is no connection.
6)
USB 2 LED: LED is SOLID ON when an active USB 2 connection is
established. LED BLINKS when USB 2 connection is suspended/asleep.
LED is OFF when no USB 2 connection is detected.
7)
LED is SOLID ON when an active USB 3 connection is established. LED
BLINKS when USB 3 connection is suspended/asleep. LED is OFF when
no USB 3 connection is detected.
8)
LAN Port (100/1000 Mbps): Ethernet pass-through channel connects
to network or ethernet device.
9)
Link Port (RJ45): Accepts RJ45 connector for CAT 6a/7 cabling to
connect Local to Remote.
10)
USB Host Port: USB 3 Type B receptacle used to connect Local to USB 3
Host computer.
11)
DC Power Port: Locking connector for the included power adapter –
accepts 24V DC 1A.
© Copyright 2019 Hall Research, LLC.
USB 3.0 Extender
5