Model U3Cat6-R - Hall Research Technologies U3CAT6 Series User Manual

3CAT6

Model U3CAT6-R

1) Power LED: LED is SOLID ON when DC power is supplied. LED OFF
when no power is supplied.
2) Mode LED: Reserved for manufacturer use.
3) Config: Reserved for manufacturer use.
4) Status LED: LED is SOLID ON when system is functioning normally. LED
BLINKS during boot OR to indicate a temperature warning in unison
with LINK, USB2, and USB 3 LEDs.
5) Link LED: LED is SOLID ON when the Remote extender is linked to a
Local extender. LED is OFF when there is no connection.
6) USB 2 LED: LED is SOLID ON when an active USB 2 connection is
established. LED BLINKS when USB 2 connection is suspended/asleep.
LED is OFF when no USB 2 connection is detected.
7) LED is SOLID ON when an active USB 3 connection is established. LED
BLINKS when USB 3 connection is suspended/asleep. LED is OFF when
no USB 3 connection is detected.
8) LAN Port (100/1000 Mbps): Ethernet pass-through channel connects
to network or ethernet device.
9) Link Port (RJ45): Accepts RJ45 connector for CAT 6a/7 cabling to
connect Remote to Local.
10) USB Device Ports (Type A): USB 3 Type A receptacle accepts all USB
devices.
11) DC Power Port: Locking connector for the included power adapter –
accepts 24V DC 2.71A.
© Copyright 2019 Hall Research, LLC.
6