Separation Of Right Cover Unit - Canon ZR70 MC A Service Manual

1-4 Separation of Right Cover Unit

(1) Remove five screws (b × 3, c × 1, d × 1), disconnect CN990, CN1502 and CN4001 and detach the Right Cover Unit.
(2) Draw out the Shaft and detach the Card Cover. (Only for ZR70 MC A, ZR65 MC A)
<Note on Reassembling>
(1) Push the CN990 and CN1502 sufficiently so as to prevent them from being pinched in the part A.
(2) Since the Shaft may come out easily, take care not to lose the Shaft. (Only for ZR70 MC A,ZR65 MC A)
Before using the Card Cover and Shaft supplied for repair service, remove their protection sheet and shaft-dropping preventive
tape.
(1) - b
CN990
(1)
(1)
Note on Reassembling (1)
b c
3mm
Metal
Metal
M1.7
M1.7
(1)
CN1502
A
d
4mm
4.5mm
Metal
M1.7
(self tap)
CHAPTER 4. DISASSEMBLING ADJUSTMENT
(1) - d
(1) - b
Right Cover Unit
(1) - c
ZR70 MC A
ZR65 MC A
only
Shaft
back of the Right Cover Unit
Fig. 4-3
4-4
ZR70 MC A, ZR65 MC A, ZR60 A
(1)
CN4001
(1) - b
(2)
Card Cover
Shaft remove