1-2 Separation of Front Unit
(1) Open the cassette cover, F Jack Cover and L Jack Cover and remove seven screws (b × 5, c × 1, d × 1).
(2) Disconnect CN701 and detach the Front Cover Unit.
(3) Remove the Cushion.
<Note on Reassembling>
(1) Attach the Cushion at the position shown in the figure. Run the MIC cable through the slit of the Cushion.
Front Cover Unit
(1) - b
L Jack Cover
(1)
(1) - b
(1)
(1) - d
(1) - c
b
c
3mm
4mm
Metal
Metal
M1.7
M1.7
Cassette Cover
Cushion
(1) - b
(1) - b
F Jack Cover
d
4.5mm
Metal
M1.7
(self tap)
Fig. 4-1
CHAPTER 4. DISASSEMBLING ADJUSTMENT
(1)
(3)
(2)
CN701
(2)
Note on Reassembling (1)
Hold the cushion by IR-LED holder.
CN701
4-2
ZR70 MC A, ZR65 MC A, ZR60 A
Take care to
prevent the cushion
from being pushed
out of this line to
the right side.
Cushion
Run the MIC Cable
through the slit of the
Cushion.
Take care to prevent
the cushion from
hanging over the boss.