Sd Detail - Panasonic AK-HRP1005G Operating Instructions Manual

22 SD DETAIL

The control destination differs depending on the unit configuration.
When the camera is an AK-UC4000
The fixed value is displayed. The setting cannot be changed.
When the camera is other than the above
The control is performed for the CCU. Otherwise, the control is performed for the camera.
The setting values will vary depending on the connected camera.
Item
DETAIL LV H Adjusts the level of horizontal detail.
DETAIL LV V Adjusts the level of vertical detail.
PEAK1 FRQ Selects the contour correction frequency band (boost frequency or peak frequency). Changes the contour
width.
PEAK2 FRQ Selects the contour correction frequency band (boost frequency or peak frequency). Changes the contour
width.
CRISP Set the noise elimination level for the detail signals
LEVEL DEPENDENT Set the level of dark detail removal.
DARK DETAIL Set the level of dark detail enhancement.
DETAIL Enables or disables the SD detail effect.
Setting details
- 87 -
ROP menu