Setting The Ip Addresses Of The Devices; Configuring Various Settings Of The Rop - Panasonic AK-HRP1005G Operating Instructions Manual

Subnet mask
Default gateway

Setting the IP addresses of the devices

Configuring the settings using the menus
Set the IP address of the unit (ROP) in [ROP IP SETTING] under the ROP menu.
"39 ROP IP SETTING" (see page 115)
For the IP address of the CCU, refer to the operating instructions for the CCU.
Configuring the settings using Easy IP Setup Software
Use Easy IP Setup Software to set the IP address of each device.
"Easy IP Setup Software" (see page 127)

Configuring various settings of the ROP

Use ROP Setup Software to configure various settings.
"ROP Setup Software" (see page 129)
255.255.255.0
192.168.0.1
- 126 -
Software